Automotive, Overland and Campervan Fabrication

We design and manufacture bespoke stainless steel and aluminium parts for 4x4s, overland vehicles, campervans, pickups and motorcycles in our Chichester-based workshop, for owners and converters across the UK, from 4×4 builds to full campervan fabrication. Most of what people want for their vehicle either doesn’t exist off the shelf or doesn’t quite fit, so everything we make is made to order, modelled in 3D CAD and approved by you before we cut any material.

Built to marine standards

Our background is marine fabrication, where every part has to survive salt water year after year. We bring the same marine grade 316 stainless steel, aluminium, TIG welding and finishing to vehicles, which face salted winter roads, mud and constant washing. Aluminium keeps the weight down where payload matters, especially on vans and campervans.

What we make

Overland and 4×4

  • Roof racks and roof platforms, sized for solar panels, awnings and roof tents
  • Rear bumpers with swing-away tyre carriers and jerry can holders
  • Bull bars and winch bumpers
  • Rock sliders, tree bars and underbody protection
  • Rear and roof access ladders
  • Awning, recovery board and gas bottle brackets

Campervans and vans

  • Bed frames, seat bases and table brackets
  • Stainless steel and aluminium water tanks, internal or underslung
  • Stainless steel shower trays
  • Kitchen pod, drawer and storage frames
  • Roof racks, ladders and solar panel frames

Pickups

  • Tray backs, headboards and load bed racks
  • Canopy roof racks and toolbox frames

Motorcycles

  • Panniers, pannier frames, luggage racks and crash bars
  • Brackets, mounts and one-off parts

Restoration and one-offs

  • Obsolete and hard-to-find parts remade, copied from the original
  • Exhausts, fuel and oil tanks, header tanks and washer bottles
  • Stainless trim, brackets and handlebars
  • Polishing and weld repairs to classic car and motorcycle parts

Brushed stainless steel shower tray made to order for a VW campervan conversionStainless steel campervan shower tray with a custom drain coverClassic motorcycle engine cover mirror polished, ready for weld repair

Vehicles we work on

We make parts for the Land Rover Defender, both old and new, the Land Rover Discovery, Toyota Land Cruiser and Hilux, Ineos Grenadier, VW Transporter and Crafter, Ford Transit, Transit Custom and Ranger, Mercedes Sprinter and Isuzu D-Max, as well as classic cars and motorcycles. If yours isn’t listed, we can still measure it up and make parts to fit.

For converters and specialists

Campervan converters, 4×4 specialists and accessory brands come to us for parts they need again and again. We can develop a design with you, make a prototype, then manufacture small batch runs to the same drawing, so every part fits the same way.

How it works

  1. Send us a short description and a few photos of your vehicle and what you’d like.
  2. We talk through what you need and give you a quote.
  3. We measure up the vehicle or work from the old part, model it in 3D CAD for your approval, then manufacture it in our workshop.
  4. It’s delivered ready to fit. We can fit it as an optional extra, or your garage, converter or you can fit it.

Frequently asked questions

Can you make something for my vehicle if nothing off the shelf fits?

Yes. That’s most of what we do. We measure your vehicle and design the part to suit it, rather than adapting something made for a different model.

Stainless steel or aluminium?

Stainless steel is very strong and won’t rust, and can be mirror polished or left with a brushed finish. Aluminium is much lighter, which helps with payload on vans and campervans, and can be left natural, anodised or powder coated. We’ll advise on the best material for each part.

Can you copy an old or broken part?

Yes. We can remake obsolete or damaged parts from the original, from photos or from drawings, and improve on the original where it has failed.

Can you make more than one?

Yes. As well as one-offs, we make small batch runs for converters and specialists, all to the same approved drawing.

Do I need to bring the vehicle to you?

For parts that have to fit the vehicle exactly, it’s best to bring it to our Chichester-based workshop to be measured up. For smaller parts, sending us the old part, photos or measurements is often enough.

Related work

See examples in our work.

Got a project in mind?

Send us a photo, a drawing or a description and let’s discuss your project.

Discuss Your Project